French Link 2 Ring Gag Bit

A Two Ring Gag (also called a "2-ring elevator bit") is the simpler counterpart to the Three Ring Gag — a fixed-shank gag bit offering just two rein attachment points rather than three, giving a more limited but still adjustable range of leverage.

Design

• Like the three-ring version, it has a main ring at the mouthpiece (the "snaffle" position) and a single additional lower ring offering the gag/leverage action — rather than the two lower rings found on a three-ring gag.
• The single ring above the mouthpiece is for attaching the bridle's cheekpieces, while the bottom ring offers the leverage rein setting.
• The mouthpiece can vary — single-jointed, French link, or with a lozenge/roller — independent of the ring design.

Function

• Two rein options only: Reins can be attached to the main ring (functioning essentially as a plain snaffle) or to the bottom ring, which engages the gag/leverage action.
• Combined poll and mouth pressure: When the lower (gag) rein is engaged, tension is placed on the cheekpieces, applying poll pressure, while the mouthpiece is drawn/raised slightly in the mouth — both actions working together to help place the horse's head in a more controllable position.
• Milder than the three-ring version: Because there's only one leverage setting rather than a graduated middle-and-bottom option, the Two Ring Gag is not as severe and does not provide as much leverage as the three-ring model, which is typically reserved for very strong horses.
• Lateral/steering support: As with other multi-ring gags, the rings can also function somewhat like the shanks of a Full Cheek, adding pressure to the side of the face during a turn.
• Rebalancing: The overall action helps a horse rebalance and come back off the forehand, useful for increasing lightness and control when used correctly.

What it's good for

• Horses that need some extra "brake" but not the strongest leverage option: A good middle-ground choice for a horse that's a bit strong or leans on the bit, without needing the full range of severity a three-ring gag offers.
• Three-day eventers and jumpers: Elevator bits like this are popular in eventing and showjumping, where extra control and quick rebalancing before fences matter, particularly in cross-country and stadium phases.
• Riders wanting simplicity: With only two rein positions to choose from, it's a more straightforward option than the three-ring version, while still offering adjustable severity between "plain snaffle" and "leverage engaged."
• Horses that pull, lean, or are difficult to turn: As with other gags, useful for horses that lean on the bit, are strong pullers, or are heavy on the forehand.

A note on use and severity

• All gags, including the two-ring version, should ideally be used with two sets of reins — one on the main/snaffle ring, and one on the lower/gag ring — allowing the horse to be ridden predominantly off the snaffle rein, with the gag rein used only when needed.
• Gag bits can be very severe if used improperly, so guidance from a knowledgeable trainer is recommended, and they are not suitable for novice riders.
• Not all horses respond well to gag action — some may resist, lean against the pressure, or toss their head, so it's worth assessing the individual horse's response carefully.

Competition legality

Like other gag bits, the Two Ring Gag is not permitted in dressage, but is commonly used in showjumping, eventing (particularly cross-country), and hacking where additional control is needed.

Summary

The Two Ring Gag offers a simpler, milder version of the adjustable-leverage gag concept — combining poll and mouth pressure with some lateral support — making it a popular choice for horses that need a bit more control than a snaffle provides (especially in eventing and jumping) without requiring the stronger, more graduated leverage of a three-ring gag.

This pairs the French Link mouthpiece — widely regarded as the mildest common double-jointed shape — with stainless steel, the most standard, low-maintenance bitting material.

Design

• The French Link consists of a double-jointed mouthpiece with a flat, rounded center plate (lozenge) between two outer sections, rather than a single hinge.
• The center plate lies flat against the tongue, with no angled edge, unlike the Dr. Bristol's offset plate.
• Stainless steel is durable, tasteless, and non-rusting — it stays neutral and consistent over time, with no natural salivation-boosting properties (unlike sweet iron/blue steel or copper).

Function

• Eliminates the nutcracker effect: Because the center plate is flat rather than angled, the French Link removes the sharp, pinching action of a single-jointed bit almost entirely, distributing pressure smoothly across the tongue and bars instead of concentrating it in one spot.
• Even, predictable pressure: The flat lozenge spreads contact evenly, offering a comfortable, non-aggressive feel — this is considered the mildest, most straightforward of the common double-jointed mouthpiece shapes.
• More independent rein action: With two joints instead of one, each side of the mouthpiece has some independent movement, allowing clearer, more precise communication when using one rein at a time.
• Neutral, consistent material: Stainless steel doesn't oxidize, stain, or develop a taste of its own, so unlike blue steel or copper, this combination doesn't offer any built-in salivation-boosting effect — the mouthpiece's mildness comes purely from its shape, not its material.
• No leverage or added severity: As a true snaffle, this bit works entirely on direct pressure — no shank, curb chain, or poll pressure involved.

What it's good for

• Horses with fleshy or sensitive tongues: The flat lozenge follows the tongue's contours comfortably and offers more room than a single joint, making it well liked by horses with larger tongues or general tongue sensitivity.
• Young or green horses learning about contact: As one of the mildest jointed mouthpiece shapes available, it's a popular, reliable choice for introducing horses to bit contact without overwhelming them.
• Horses with narrow or sensitive bars: Because pressure is directed more onto the tongue and less sharply onto the bars compared to a single joint, it can suit horses with sensitive or narrow bars.
• Riders wanting a dependable, low-maintenance, all-purpose mouthpiece: Stainless steel's practicality (no rust, no staining, easy to clean) combined with the French Link's comfort makes this one of the most common, versatile "default" choices across nearly every English discipline.
• Horses that don't need extra taste-based encouragement: Suited to horses that already accept contact reasonably well and don't require the additional salivation stimulation that sweet iron, blue steel, or copper mouthpieces are designed to provide.

A note on classification

• As with other mouthpiece combinations discussed, the overall lateral action and stability still depends on the cheek style (loose-ring, D-ring, eggbutt, Full Cheek, etc.) the French Link is built into — this mouthpiece provides the tongue/bar pressure profile, while the cheek determines steering support and mouthpiece movement.
• This is generally considered a mild, standard, all-purpose snaffle mouthpiece and material pairing — comfortable and predictable, without any added acceptance-boosting or control-enhancing properties beyond its basic shape.

Summary

A Double-Jointed French Link Stainless Steel bit offers the gentlest, most evenly distributing of the common double-jointed shapes, paired with the most practical, low-maintenance, and widely accepted bitting material — making it one of the most popular, dependable, all-purpose choices across disciplines, particularly well suited to horses with sensitive tongues or bars, and to riders who want a simple, comfortable, no-fuss mouthpiece without needing a specialized taste or acceptance boost.