Oval Link Loop Ring Gag Bit

A Loop Ring Gag (sometimes called an "Elevator" style gag) is a running gag variant with a distinctive continuous loop-shaped ring on either side of the mouthpiece, rather than the separate holes-and-cheekpiece system of a traditional running gag like the Cheltenham or Balding.

Design

• Each side features a rounded, loop-shaped ring through which the bridle's cheekpiece and the gag rein both pass, with the mouthpiece attached at a point along the loop.
• As with other gags, the cheekpiece portion of the loop connects up to the bridle's headpiece, while the rein attaches at the lower part of the loop.
• The mouthpiece can vary — single-jointed, double-jointed, French link, ribbed, or rubber/synthetic — independent of the loop-ring cheek design.
• The loop's continuous shape gives balanced, symmetrical cheekpieces on both sides for even pressure distribution.

Function

• Mild lever action: When the rein is engaged, the cheekpieces tilt forward, lifting the mouthpiece up in the mouth. This causes the horse to feel simultaneous pressure on both the poll and the mouth — the core gag mechanism.
• Encourages head-raising and rebalancing: As with other gags, this lifting action discourages a horse from dropping its head, leaning on the forehand, or getting heavy in the hand, encouraging it to rebalance back onto the hindquarters.
• Comfort-focused design: The balanced, rounded loop shape is designed to sit evenly against the face, aiming for comfort alongside the leverage action, rather than the harder edges of some other gag styles.
• Two-rein or Pelham-strap use: As with most gags, it's commonly used with two reins — one attached directly to the bit ring for ordinary snaffle-style contact, and one to the gag portion, engaged only when the lifting/rebalancing action is needed. It can also be used with Pelham straps to simplify to a single rein.
• No leverage limit: Like all gags, there's no built-in stop to how far the bit can rise in the mouth with sustained pressure, so use requires good timing and release.

What it's good for

• Horses that lean, rush, or get strong, especially in faster or jumping work: The lifting/rebalancing action helps riders manage horses that get heavy on the forehand or pull hard, particularly over fences or in open galloping work.
• Horses that walk or work "behind the bit" or need encouragement to raise the head: The lifting mechanism can help correct a horse that drops too low or curls away from contact.
• Riders wanting a milder-feeling gag: Compared to some other gag styles with more rigid cheeks, the loop ring's rounded, balanced design is often marketed as a more comfortable option while still providing the core gag benefit.
• Show jumping and eventing: Common in these disciplines where quick rebalancing and extra control are useful, especially in speed classes or cross-country.

A note on use

• Not suitable for inexperienced riders — as with all gag-style bits, the leverage action requires good hands and timing to use effectively and fairly.
• Using two reins is strongly recommended so the gag action can be applied only when necessary, rather than constantly engaged.

Competition legality

Like other gag bits, the Loop Ring Gag is generally not FEI dressage-legal, and is used instead in disciplines such as showjumping, eventing, and some hunter/jumper or cross-country contexts where stronger control is accepted.

Summary

The Loop Ring Gag offers the classic gag benefit — lifting the mouthpiece to apply combined poll and mouth pressure, encouraging rebalancing off the forehand — in a rounded, balanced ring design aimed at comfort, making it a popular choice for horses that lean, rush, or get heavy in faster work, best used with two reins by an experienced rider.

This pairs the rounded, smooth-sided lozenge center piece with stainless steel throughout — the most standard, low-maintenance bitting material, offering the lozenge's comfortable shape without any specific taste- or salivation-boosting properties.

Design

• Like the French Link, the oval/lozenge mouthpiece is double-jointed — two outer sections plus a center piece — but the center piece is rounded and oval-shaped (smooth-sided) rather than a flat plate.
• Because it's rounded rather than flat, it has no thin edges, unlike a French Link's flat plate, which can present an edge depending on how it settles in the mouth.
• Stainless steel is durable, tasteless, and non-rusting — it stays neutral and consistent over time, with no natural salivation-boosting properties (unlike blue steel/sweet iron or copper).

Function

• Rounded, even pressure distribution: Because the lozenge is smooth and oval all the way around, there's no edge to dig into the tongue regardless of how the bit sits or rotates in the mouth — a consistently gentle, "wrapped" feel.
• No nutcracker effect: As with any double-jointed mouthpiece, the two joints eliminate the sharp folding/pinching action of a single joint, distributing pressure across the tongue and bars rather than concentrating it.
• No edge to worry about, unlike a French Link: Because the French Link's flat plate can present a thin edge depending on its exact angle in the mouth, some riders and trainers specifically prefer the lozenge shape to remove that variable entirely — the smooth roundness means the horse experiences essentially the same gentle contact regardless of the bit's precise orientation.
• Independent side movement: The double-joint construction allows each side of the mouthpiece some independent movement, giving clearer lateral and flexion cues than a single joint.
• Neutral, consistent material: Stainless steel doesn't oxidize, stain, or develop a taste of its own — so unlike the blue steel or copper versions, this combination offers no built-in acceptance or salivation boost. The mouthpiece's comfort comes purely from its shape.
• No leverage or added severity: This remains a true snaffle, working purely through direct pressure with no shank or curb chain.

What it's good for

• Horses with small mouths, low palates, or big tongues: The rounded lozenge shape suits horses with limited mouth space, since there are no edges to catch regardless of positioning.
• Horses that seem uncomfortable in a flat French Link: Some horses fuss, gape, or resist a French Link's flat plate but settle comfortably in a rounded lozenge — individual preference between the two shapes varies quite a bit horse to horse, so this is worth trying if a French Link hasn't suited a particular horse.
• Riders wanting a dependable, low-maintenance, all-purpose mouthpiece: Stainless steel's practicality (no rust, no staining, easy to clean) combined with the lozenge's comfortable, edge-free shape makes this a solid, versatile "default" choice.
• Horses that don't need extra taste-based encouragement: Suited to horses that already accept contact well and don't require the additional salivation stimulation that blue steel or copper mouthpieces are designed to provide.
• General schooling and everyday use across most disciplines: A mild, comfortable, and practical mouthpiece choice for a wide range of horses and riding levels.

A note on classification

• The overall lateral action still depends on the cheek style (loose-ring, D-ring, eggbutt, Full Cheek, etc.) this mouthpiece is built into.
• This pairing sits at the mild end of the spectrum, similar in gentleness to a French Link, but with a rounder, edge-free profile and no material-based acceptance boost — comfort here comes entirely from shape rather than taste or texture.

Summary

A Double-Jointed Oval/Lozenge bit in stainless steel offers a smooth, edge-free, evenly distributing mouthpiece shape paired with the most practical, low-maintenance, and widely accepted bitting material — making it a dependable, comfortable, all-purpose choice, particularly well suited to horses with small mouths or low palates, or those that respond better to a rounded lozenge than a flatter French Link, without needing any specialized taste or salivation-boosting material.